1 / 5
Fishing Rod for PC4M10 Adapter PTFE with 1mm threads — zdjęcie 1
1 / 5

Fishing Rod for PC4M10 Adapter PTFE with 1mm threads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Absorb the shock of the print head moving with this fishing rod with a PC4M10 threaded slot for your PTFE fed filament!

Ocena
5 / 5
Polubienia
6
Pobrania
23
Wydruki
1
Wyświetlenia
426
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Same as original but the top is altered to have a PC4M10 adapter thread with 1mm threads with a PTFE tube stop just below. The filament hole is 3.5mm with a chamfered lower exit hole. This positions the filament exit from the PTFE tube is the same position as it would come off a spool sitting on the spool holder for the most natural filament path to the extruder. The benefit is that you have the added flex of the rod regulate the tension on the bondtech gears and a path to a drybox as well. I am using 4mm outer diameter, 3mm inner diameter PTFE to a polybox fitted with my PC4M10 Adapter screwed into the top exit polybox hole.

Printed with PETG with supports for the thread.

This PTFE print with the adapter is a requirement to use with this rod for both ends (rod and polybox ends)

 

MMU3 Use (New)

You can use this with a printer that has the MMU3 installed to allow single use filament from a sixth spare spool. Turn off the MMU and filament sensor in settings and then use this to feed filament to the extruder.

PC4M10 Adapters with 1mm threads for Polybox holes:
https://www.printables.com/model/416215

 

My other Polybox mods:

Strain relief circle for PTFE tube routing from Polybox
https://www.printables.com/model/418131
(includes a clamp that works with the item below)

PTFE tube with PC3M10 1mm threaded top frame 'Fishing Rod' connector for MK3S printer
https://www.printables.com/model/428973

MMU2S 'Viking Boat' Rear PTFE tube curved connector for 5 PTFE tubes
https://www.printables.com/model/428281

 

Tagi