1 / 4
Wider Bambu poop chute with curve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had issues with the original chute jamming and it wouldnt scale properly so i made it wider in f3d.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 176
- Wydruki
- 5
- Wyświetlenia
- 1135
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (1)Kolekcje (51)Powiązane
I ran into issues with the chute jamming up due to being so narrow, it wouldnt scale properly so i made a couple wider versions for myself in f3d. There is a 15mm wider version and a 20mm wider version that uses the same magnets as the original which are listed below. Hopefully this works for others as well!
Model has spots for 5 magnets (11.9mm x 3mm) https://www.amazon.com/gp/product/B09T9DVVFT