Rook MK1 Glass Bed Frame Countersunk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame to hold 120mm x 120mm glass bed to use with flathead M4 leveling bolts
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I printed Kanrog's frame, and when I got my bed spring kit, the M4 bolts were flathead, not hex head. Another “wait, what's standard?!” moment!
I remixed the frame with countersunk holes to keep the heads below the flat mating surface, with recesses underneaths for nuts (which protrude a bit because I wanted to keep the thickness of the frame).
I redid the corners slightly to accommodate sharp cornered glass and to help snap in a 120mm square.
I'm currently running it with a dummy PETG printed bed to get the printer running :o I won't have time to get a sheet of glass this week and a heated bed kit is on the way, and I wanted to see how janky I could be in the mean time. It works!
I think I printed the frame in ASA but it might be PLA pro/plus/etc.