Craftsmart Clay/Pasta Roller Handle Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attachment to go on the handle of a Craftsmart Clay/Pasta Roller. Requires drilling 3 holes and uses 3Mscrews
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an attachment to go on the handle of a Craftsmart Clay/Pasta Roller.
This does require drilling 3 holes into the pasta maker's removable front faceplate.
This is designed to use three M3 Socket Head screws and nuts.
Some notes regarding this design:
The handle can be removed from the attachment if you pull when the notches align. If you remove the handle and then manually turn the rollers, the notches will be misaligned and you will have to re-align them. If this happens, I recommend using a flash light to look inside the hole and re-align the notches and insert the handle.
You can also remove the attachment via the screws :)