1 / 2
Fokoos Odin5 F3 - X linear rail base — zdjęcie 1
1 / 2

Fokoos Odin5 F3 - X linear rail base

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a starting point to install linear rails on the Fokoos Odin5 F3 Compatible with Apollo Shroud

Ocena
0 / 5
Polubienia
13
Pobrania
64
Wydruki
0
Wyświetlenia
612
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a starting point to install linear rails on the Fokoos Odin5 F3

Compatible with Apollo Shroud and Apollo Mini - to use different aftermarket hotend and aftermarket direct drive extruder (or bowden setup)

Uses heat inserts M3x4(L)x5(OD) or M3x4(L)x4.5(OD)
Uses a basic endstop (stock endstop and motor might still work, I just don't remember how it was setup)

Front mount matches a front mounted rail, holes are spaced 20mm in a square pattern.

If you want the ApolloLander or Apollomini shroud, support my work on Patreon
(use the linear rail model of the Apollo to mount to this setup)
patreon.com/squirrelf3d
 

Tagi