Decorative Sleeve for PET preform bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spiral decorative cover for a common PET bottle with a 27.5mm diameter
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A quick spiral outer decorative sleeve for a PET preform bottle. This is designed to print for a 27.5mm diameter (being the bottles I had on hand) so you might need to scale it slightly after measuring your bottles.
This print is also a test of how well your printer behaves. It printed fine with Eryone PLA here on an X1C.
This is designed to be a tight friction fit. Because of slight variations in PET bottles, you might find it helps to soak the print and bottle in hot water to slide it on. The heat softening of PLA will work in your favour here.