Citroen Xara Picasso shift knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement shift knob for Citroen Xara Picasso 1999-200? Tight fit - 11mm hole.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 899
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hole R=11.3mm (tight fit to 11mm stick). Height: approx. 9cm, max. R=6cm.
There are several versions of this gear shift knob:
- knob with no gear numbers on top
- knob with gear numbers engraved on top
- knob with top cut off and separate plate with gear numbers (e. g. if you want to print it in a different colour)
No print supports are needed (no overhangs).
You might want to print it with material resistant to temperatures in a car.
Installation: remove the old knob and put it on the metallic rod. No tools are necessary. It's a tight fit (11.3mm).
The bottom ring is for the leather sleeve. Just pull it over.
Use it at your own risk. Part safety and properties not tested in a real environment (e.g. car crash).
It fits Xara Picasso HDI 2001. For other models - I have no idea.