Sky-Watcher HEQ5 Knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Latitude knobs that use the existing swing-tab bolts
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
Wanted a knob other than the standard/stock swing-tab bolt that comes stock with the HEQ5 mount. Had tried several designs that just didn't have the clearance or meant that I would have to modify the stock bolts.
This solutions allow you to keep the existing stock bolts without modification, HOWEVER(!), will not be helpful if you are at a latitude greater than 45 degrees :( as there is insufficient clearance.
I find these knobs to be very easy to get those finer adjustments on latitude.
This print was done at .2mm, PETG, 20% infill. If you do want to drill a hole in the swing-tab bolt, there is an accommodation for an M3 nut and screw.