1 / 3
Suspended Glass For Photography - 1-1/4 Inch Pipe Foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be used for many purposes. Nevertheless, it was mainly designed to suspend a sheet of glass in the air.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This model can be used for many purposes. Nevertheless, it was mainly designed to suspend a sheet of glass in the air. This setup is used to take pictures of small objects without shadows.
This object is designed for standard 1-1/4 inch abs drain pipe.
You will need the following to make the photo suspended glass.
- 4 x 1-1/4-inch drain pipe. Mines are 9 inches in length.
- 4 feet.
- 2 somewhat rigid rods. I have used steel rods, 3/16 inch in diameter.
- 1 thin sheet of glass.
- 1 large piece of paper or thin cardboard.
Drill holes near the top of the pipes to insert the rods.