Nonslip base for OXO Salad Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nonslip base to replace the original on a "OXO Good Grips Little Salad and Herb Spinner".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have an old OXO Salad Spinner, but sometime over the years I lost the base that keeps the salad spinner stable as you use it. I could just replace the whole thing, but repairing it is so much more efficient.
I know that OXO has released many different salad spinner models over the years. Unfortunately, I don't think they have any label or version number. Please compare your model with the one in the photos; if possible, I'd suggest measuring your salad spinner base. The outermost diameter of the largest groove in the base of my salad spinner is 133.63mm (aka 5.236 inches). If your salad spinner is a different size, I'm sorry but this will not fit your model.
I printed in Ninjatek Ninjaflex TPU using a 0.4mm nozzle, 0.2mm layer height, 20mm/second speed, and absolutely NO cooling. At this slow speed, the print will take around three hours. It took me a few tries to find a combination of settings that worked for me. Good luck!
You could try other filaments, but part of the “secret sauce” that keeps the whole thing stable is that TPU slightly deforms and makes good contact with the countertop. If you do print in PLA or PETG or even a different TPU, and it works, please let me know.