Guardian Hound / Shambling Mound
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cthulhu inspired creature. These models were made for a niche scenario in game but could be used as plants or animals.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 292
- Wydruki
- 0
- Wyświetlenia
- 1280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Update: I have changed the CC license of my models because of the lack of clarity around AI use. If you want to re-mix, reuse, rewhatever my model, just ask..
Description:
I made these guardians for a very niche Dark Sun scenario. I did not flag them as Dark Sun because it was a very weird branch involving Blue Age ruins. In any case, I wanted to share them because I thought they might be great for other scenarios.
They were inspired by Cthulhu mythos, shambling mounds, and mostly the guardians from The Secret World.
Though you may not see much resemblance because I took them in a very organic plant like direction.
They could also be painted up to be elementals since their bodies could take on a very water or lava appearance depending on your colors.
Anyway...
Model Options:
I have attached 4 models. Three are the basic models and the fourth is a prototype. This prototype has a very different look than the others. You may also notice that the print I posted of the prototype has a broken tail. The tail is in the model… I just dropped him when I was removing the supports.
Printing Notes:
General Note: I print in FDM so I try to make my models FDM friendly. Though it should be noted that I print at 0.1 to 0.05mm layer heights and with a 0.25mm nozzle. You may find you need to make adjustments to supports to accommodate your printer and print settings.
Scale: These are designed for printing at a large creature scale (roughly 50mm) or greater. They are probably fine printed smaller, but some details will probably be lost and the faces may not print well small. As usual, your mileage may vary.
Supports: I printed these using the Prusa 2.6 alpha organic supports. (I love them!) They were tricky to remove in a few places with the default settings and I wonder if rectilinear would have been better suited. In any case, supports are needed and can be tricky around the faces of these creatures.