1 / 16
P&O Cruises Ventura Cruise Ship — zdjęcie 1
1 / 16

P&O Cruises Ventura Cruise Ship

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1:500 Scale Model of P&O Cruises Ventura Cruise Ship

Ocena
0 / 5
Polubienia
120
Pobrania
564
Wydruki
0
Wyświetlenia
5159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Scale Model of P&O Cruises Ventura - for personal use only.

Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).

Before trying this model, or for other printers it is recommended you try this simpler version first - Ventura Single Colour 1:1000 

Designed using Fusion 360 - see video for details

 

With some compromises on colours could probably print with one 4 colour AMS.

Model is appx 250% the size of the build place - so each deck is split into sections that need to be printed separately.

Could be scaled down slightly to fit onto a Prusa MK3s build plate with MMU2s or Palette2

The model consists of over 400 STL files - so has been published as Bambu Studio plate level 3mf files.     

The model is designed for each deck to be printed separately in order to minimise support requirements.

Deck sections are then joined together using dovetail joints and then each deck is bolted together using M4 Cap Head Bolts.

Printing the model requires  21 separate 30min to 9.5 hour prints - so a total of approximately 50 hrs on a BLX1C  which in my case was spread over 2 weeks.

For the lower decks and Hull I designed it some small tabs that need to be shaved off to square off the external corners and hide the joins as much as possible.

Also in this version of the model the radar tower on deck 18 at the front of the ships needs to be printed in separate sections and superglued together to avoid messy supports.

Untested PrusaSlicer MMU2s/P2PP versions provided for Hull up to deck9 only at present.  Dovetail clearance test 3mf file also included.   I will create further PrusaSlicer files when requested via comments.

This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.

This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.  

 

Update History

Update 24/3:  Note that the Bambu Studio 3mf files initially uploaded were created as a way of packaging up the STLs and assigning the correct colours.  They all reference the classic wall generator. It is necessary for the thin lines on Deck16 and Deck16 to use the  Arachne wall generator - so new versions have been uploaded.  The rear ‘Hamilton’ text is also slightly improved by this too - so a new version of Hull SB has also been uploaded.

Update 25/3:  Funnel Plate - colour corrected on white section, plus coloured parts split out onto separate plates to reduce number of colour changes.  Also correction to deck17 mid section.

 

Update 26/3:  Deck 18 Dish Rounds correction

Tagi