World's Best 3D Printed Frisbee?
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Probably not! But, an easy-to-print and durable frisbee flying disc with excellent performance.
- Ocena
- 4,75 / 5
- Polubienia
- 90
- Pobrania
- 1239
- Wydruki
- 5
- Wyświetlenia
- 6285
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE:
Please see the revised version that prints without supports and has better flight characteristics:
https://www.printables.com/model/1305486-best-3d-printed-frisbee-v2
__________________________________________________________________________________________
This frisbee easily flies 100+ feet (large one 200+) on a good throw: use lots of wrist snap and point the front slightly upward. The smaller one will fit most printers while the larger one needs a 300mm x 300mm bed. Prints well and plenty durable with PLA+. You can also use ABS. Supports required and you will want to give the bottom of the frisbee a light sanding to smooth it out after removing them. Never be without an outdoor flying toy again!
If the frisbee rolls to one side while in flight, use more wrist-snap in your throw. Also, bending the frisbee up or down will help trim the disc to stop the roll.
I recommend .1 mm layer height to create a smooth airfoil shape.
Take a sanding block or a sheet of 300 grit sand paper and give the underside of the disc a good sanding once the supports have been removed.