Triangle shaped Neopixel holder for Flsun v400 (Updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Neopixel LED Strips - 10mm 10 leds on each side.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 1100
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
25.03.23
I have updated the design.
Wires now loop underneath the triangle and can be pulled through the hole where the filament cable goes.
Adjusted hole for wires so now they fit under the main foot.
Top lid has altso been added.
It was printed in clear PETG and works great.
Assembly video
I created this holder for neopixel strips for the Flsun v400.
Since the printer is triangle it felt natural to create the holder the same shape.
Each side of the triangle holds a 10mm wide neopixel strip with 10 leds.
You have to cut the strips and solder in the corners.
Printed with 0.2 layer height.
You might want to add custom support over the holes for the cable ties.
This is version 2 and i have not tested it yet so i will add new info when its printed and mounted.
Since the leds only conusme around 9.9w the strips is connected directly to the MKS Robin nano v2.
I have added some feets to lift it away so the wires can be placed underneath it.