Sherpa or TBGS extruder Direct drive conversion for Prusa mini V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sherpa or TBGS extruder Direct drive conversion for Prusa mini V2
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 264
- Wydruki
- 7
- Wyświetlenia
- 2819
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Sherpa or TBGS extruder Direct drive conversion for Prusa mini V2
Dedicated to those who can't stand the prusamini bowden system, or those who want to print flexible filament.
Compared with the previous version, this version lowers the height of the center of gravity and shortens the length of the filament path by 4.5MM.
Since the TBGS extruder has the same pattern as the sherpa-mini extruder and has a similar shape, it can be directly replaced in most cases. You can enjoy the benefits of big gears.
added to starting Gcode as the mini will not save these settings
Starting Gcode for reference:
M201 E10000 ;acceleration mm/s2
M203 E120 ;max speed mm/s
M205 E5 ;E jerk mm/s
M906 T0 E300 ;TMC motor RMS current in mA. Adjust according to the motor specification, be careful not to overheat the motor.
M92 E703 ; set E steps per mm for the sherpa extruder 615 for TBGS extruder
M603 L80 U80 ;Load&Unload length
M900 K0.04 ;May vary depending on the type of filament, nozzle size, etc. Further calibration if necessary.
get Sherba mini extruder :
https://www.aliexpress.com/item/1005002487727392.html
get TBGS extruder :
https://www.aliexpress.com/item/1005005060887127.html
Sherba mini extruder designer:
https://github.com/Annex-Engineering/Sherpa\_Mini-Extruder