Philips Hue Dimmer Switch Holder with Color Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to simplify the printing of the switch holders and to add a single switch holder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a remix of the wicked Philips Hue 2 gang switch holder by LordBBQ which solved my issue of wanting to mount 2 Philips smart switches together for my living room. Their model had a complicated cut out on the back that involved some serious bridging and would not work well for mounting with command strips to my wall.
So I first edited the STL to change the back of the plate to a mostly flat surface expect for the magnet slots. This makes the model a lot easier to print but uses a bit more material, but opens up more options for mounting. I then cut the model and changed it so it could be used by only one dimmer switch for rooms that don't need two switches.
This file is designed to hold the first gen Philips Hue Dimmer Switches with the On and Off buttons, and will not properly hold the new model that has HUE on the bottom switch.