1 / 2
Voxelab Aquila Hero Me Gen7 Gantry Adapter — zdjęcie 1
1 / 2

Voxelab Aquila Hero Me Gen7 Gantry Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slight tweaks of the Aquila Pro gantry adapter for the Gen7. My Gen1 Aquila needed a 3 point mount to be secure.

Ocena
5 / 5
Polubienia
16
Pobrania
112
Wydruki
1
Wyświetlenia
642
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a 3 point mount for my original Aquila as for one reason or another, the included version did not work for the OG Aquila. I whipped together this remixed baseplate and it is SOLID. Used the recommended heat set insert that is used throughout the entire Hero Me built and a short M3 bolt from the rear of the gantry itself to utilize the 3rd hole (furthest right as you are looking at it) 

If you have an original Aquila I hope this helps you. The Hero Me is an excellent design and the fact that we are able to do anything with our printers and swap back and forth is awesome!

TO DO:
Same mod, but for the magnetic version (which I hope to myself have done soon!)

Tagi