Articulating Machine Foot (Metric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulating foot for leveling machines in your workshop or whatever else you need
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, I am designing an outfeed table for my DeWalt table saw. One of the problems is making sure it's level with the tabletop, so I decided to install articulating feed on the bottom of my saw in the supplied holes, so I can change the height as needed.
The problem is that the holes are at an angle, so I needed articulated feet. No problem. I looked up articulated feet, and I couldn't find any that had an m6 thread size, which is what would fit the hole, so I decided to make this model.
It took a few iterations to get the fit right, but these work every time, and the ball breaks free with minimal effort.
Update: added m4-m8 sizes