PS4 Controller - Extended Triggers and Buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3 part print that can attach non-destructively to a game controller to allow for non-standard hand positions.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
A 3 part system which works on extremely simple spring mechanism! Printed in PLA.
Layer height : 200um / 0.2mm
Walls - 6 (minimum)
No supports required
Brim may be necessary (use glue on PEI sheet instead of brim if required)
Print in the orientation the STL is only - or see where the 2 notches are with a chamfer and place that side on the print bed.
Useful for anyone with small hands / kids. Also useful for people having clenched fist syndrome or more. The ‘horns’ can be tweaked and modified according to the requirements - Have uploaded the .stp files.
Attaching the Trigger & Buttons to the clip has to be followed in these 3 easy steps.
