1 / 8
Auger valve for clay
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed it for extruding clay from a Kuka robot arm TCP.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
We needed it for extruding clay from a Kuka robot arm TCP.
We use a geared Nema 17 (5:1)
Compressed air is used to push clay to the valve.
Rotor needs an o-ring to seal it with the stator.
First test https://youtu.be/3bSlZ789ePQ
Print instructions
Licence: Creative Commons - Attribution Category: Robotics