1 / 5
Shark Navigator Lift Away - Wand Clip / Latch — zdjęcie 1
1 / 5

Shark Navigator Lift Away - Wand Clip / Latch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the red plastic portion of the spring-loaded clips on a Shark NV370 Navigator Lift Away Bagless Vacuum wand…

Ocena
5 / 5
Polubienia
13
Pobrania
179
Wydruki
1
Wyświetlenia
1041
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replaces the red plastic portion of the spring-loaded clips on a Shark NV370 Navigator Lift Away Bagless Vacuum wand (yes, the handle clip and the extension clip are slightly different thus 2 files). It likely will work on other similar models as well but I'm not sure - worth a shot! Pictures are of the original parts and what it looks like installed. Both of my original clips have failed, one within the first year (but of course it's not covered under warranty - thanks Shark!).

I'd suggest supports for the clip "tooth" and possibly the hole. Use a stronger infill geometry like hex. Print orientation is the default position (see file thumbnails).

Print Settings

Supports:

Yes

Resolution: 

0.2mm

Infill:

50% hex

Tagi