1 / 2
Bambu Lab AMS Small Spool Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for the Bambu Lab AMS to be able to load small spool filaments. It uses the already available rollers.
- Ocena
- 4,533 / 5
- Polubienia
- 209
- Pobrania
- 3633
- Wydruki
- 12
- Wyświetlenia
- 25 812
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 12) (Komentarze: 29)Remiksy (1)Kolekcje (335)Powiązane
This is a remix, designed from scratch, of the great model created by Billie Palmer. It has the following differences:
- Made it longer, to better support small spools.
- Added a long support at the bottom side, which touches the bottom of the AMS and stabilizes the adapter.
- Hollowed the body to use less material and speed the print up.
- Used a few 45 degree walls so no support is required.
I've been using it with 16cm spools but it should work with other sizes (let us know in the comments).
Printing
- Position it as in the STL.
- PLA or whichever other material.
- Default Bambu Studio presets work great.
- The two front bits touching the bed may have a hard time with the printer speeds. You may want to use brim.
Installation
- Remove the back roller from the AMS slot you want to use. You may insert a plastic lever under it to help.
- Turn the adapter print upside down.
- Insert the removed roller into the two front hooks.
- Insert the adapter back-bump in the AMS inside the slot you removed the original roller from.
You can now load small spools just like the other ones.
Enjoy it!