1 / 2
Kingdom Death Monster Player Boards Gear Grid and Trays — zdjęcie 1
1 / 2

Kingdom Death Monster Player Boards Gear Grid and Trays

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

KDM gear grid and player board organizer, with storage tray and lid

Ocena
0 / 5
Polubienia
9
Pobrania
138
Wydruki
0
Wyświetlenia
1309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

This is a straightforward gear grid and player board organizer for Kingdom Death Monster.  Also included is a tray with a lid for storage.  

The player board is designed around Paladin sleeved gear cards, the Hobo's Deluxe Character Sheets (which are excellent!  https://www.boardgamehell.com/products/hobos-deluxe-character-sheets-for-kingdom-death-monster ), and status tokens in coin capsules.  There are slots at the top of the board to keep fighting arts and other similar cards.  

The storage tray has space below where the boards stack in to place earned innovation cards, earned settlement location cards, extra gear, etc.  I also keep the Hobo's deluxe settlement book in the bottom of the tray (also excellent - highly recommend it!).  I have a couple of sets of these, and keep the player boards more or less fully stocked with character sheet, gear, etc. in the boards to make setup for a particular campaign much easier when I come back to it.

The lid and tray have spaces for captive 6mm x 1.5mm magnets to help keep the lid in place - you'll need to insert pauses in your GCode to insert the magnets.  

For me, these have been a significant quality of life upgrade, and take a good 15-20 minutes out of the setup process when my groups get back together to continue campaigns.  The boards are also obviously very useful for keeping the table organized during play.   

You'll need to print 4 boards.  The tray and lid are optional.  This requires a big printer - the tray s 259x367mm.  The player boards are 237x345mm.  I used PLA at .24mm height with a 0.6 nozzle to print mine.  

Tagi