Parametric vase-mode thread spool rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametrically configurable vase-mode printable rack for storing thread spools.
- Ocena
- 4,5 / 5
- Polubienia
- 20
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 518
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
General info
Was asked to help with making a thread spool rack and chose to make a configurable OpenSCAD model - you'll need to download the program to regenerate the model if you need a different layout or you can ask nicely and I'll generate & add it to the file list. :)
The included STLs are for:
- “small” spools - 32.8mm diameter, 33.4mm height
- “large” spools - 38mm diameter, 45.2mm height
If there are other popular spool sizes or rack sizes you'd like, drop me a line and I'll generate them.
The spool holder will flex a bit lengthwise, but it's acceptable, since the spools are light and the saving on filament are massive. There is an X pattern on the bottom, to provide some rigidity.
Printing
Print in vase mode.
I've tried PLA, PETG and ABS, all turned out well.
I printed with a 0.6mm nozzle with 0.65mm line width, with 0.4mm layer height.
If you use 0.4mm nozzle, then be sure to pump the line width up a bit if you want a sturdier print.