Customizable Cornhole Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Cornhole trophy with a customizable label.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 1352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Customizable Cornhole Trophy
A Cornhole trophy with a customizable label.
---
Printing Notes
Everything was printed at 0.2mm Layer Height and 15% infill. You'll prolly need supports when printing the Trophy label.stl, if so.. I recommend using Tree/Organic supports as they are easy to remove.
I've included the gcode to give you an estimate on how much filament you'll be using.. please slice your own.. each machine is different.
---
Parts List
Here are all the parts for the award. You'll need to print a total of 8 (eight) bags, so just remember to print two of [4x] Bags.stl.
- [4x] Bags.stl
- Bag.stl
- CornholeBoard-Bottom.stl
- CornholeBoard-Top.stl
- CornholeBoard-Frame.stl
- Stand.stl
- Trophy Label.stl
---
Instructions
Print each of the parts listed in the Parts List section out in the colors you'd like, except for Trophy Label.stl.
When you are ready to print Trophy Label.stl, you can use PrusaSlicer's “Add Text” tool to customize the Trophy Label.stl.
Once you have everything printed out, go ahead and put everything together. I recommend using super glue to hold the bags, cornhole board top and bottom to the cornhole frame.
Enjoy!