StageTop PlayTile Modular Brick Build plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable 25x25 Dot Build plates and an edge border to make them all fit within the StageTop system.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a work in progress. Will update with photos once the rest of the table is done printing.
I wanted to make a PlayTile with Dots for popular modular bricks, but math is hard and getting the spacing to work across the whole StageTop got the better of me, so here is a dumb work around!
For the 24x32" Table you will need:
CornerBorder - x4
ThickerSideBorder - x2
SideBorder - x4
Add more of the Side Borders as you scale the size of the table.
The spacing for the boarder should work with pre made build plates as long as they are in multiples of 5, but will order some to test against to make sure.
Spacing from tile to tile was a little off and parts wouldn't fit great. Updated the spacing between dots for stronger connections.