Points Cover for Use on a Honda CT90
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a points cover for use on a Honda CT90
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover I designed to be like the original used on a Honda CT90. I would recommend using a higher temperature filament like ABS or ASA as the cover is mounted on the engine and will potentially see high temperatures. I would also recommend using 100% infill to give the cover the greatest amount of strength as the countersunk mounting screws can potentially split the mounting holes if the screws are over tightened.
I found printing this cover in the vertical orientation with organic supports gave me the best surface finish, but you can try different orientations to see what works best for you.
I have only done limited testing with this cover on one of my bikes and haven't had any issues, but its winter and I've only been going on short rides.
If you do print and use this cover on your bike I would be interested in hearing how it works out for you.