Adapter for MMU2 printing with "Integrated Auto-Rewinder" with "Eibos Cyclopes Dry Station"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple Design for MMU2 printing with Auto Rewinder and Eibos Cyclopes Dry Station
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I like the slim design of Jim Nangano’s Auto-Rewinder (Integrated Auto-Rewinder for Spool Tank von Jim Nangano | Kostenloses STL-Modell herunterladen | Printables.com). It works well with my MMU2. I designed a very simple Add-On for use of the Auto-Rewinder in the Eibos Cyclopes Dry Station. With one or two Dry Stations no Spool Tank is needed.
Print two adapters for each spool, put them in the Dry Station instead of the bearings and glue the Auto-Rewinder with the adapters. You can still take out the rewinder for better handling of spool change.
Please note: the spools came higher than with the original bearings. You will need to increase the height of the lid.
My first setup was this: Cyclopes Filament Dryer adapter guide — EIbos brand by Maximpulse - Thingiverse.
Currently I’m happy with this: Eibos Cyclopes Upgrade (Extension) von dyeater | Kostenloses STL-Modell herunterladen | Printables.com