Kossel Effector for E3D v6 Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of the standard kossel effector with an optional push fit mount, in case the original plastic…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a modification of the standard kossel effector with an optional push fit mount, in case the original plastic clip quits its duty. The push fit thread is 1/8" Rp. The overall polycount was also increased and the effector heigt decreased to 5.5mm. The mount was originally planned to be done by a printed collar which fits the E3D mounting notch to the M3 threads, but since it has become a pretty good press fitting (the effector was in fact 16.2mm instead of the 16mm in the official drawings), I can delay the use of the additional push fit option and the collar until necessary.
Print instructions
Category: 3D Printer Parts Summary
This is a modification of the standard kossel effector with an optional push fit mount, in case the original plastic clip quits its duty. The push fit thread is 1/8" Rp. The overall polycount was also increased and the effector heigt decreased to 5.5mm. The mount was originally planned to be done by a printed collar which fits the E3D mounting notch to the M3 threads, but since it has become a pretty good press fitting (the effector was in fact 16.2mm instead of the 16mm in the official drawings), I can delay the use of the additional push fit option and the collar until necessary.