1 / 11
SKADIS pliers holder for the whole wall [Držák na kleště]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA SKÅDIS pliers holder for the length of the whole wall
- Ocena
- 4,714 / 5
- Polubienia
- 75
- Pobrania
- 484
- Wydruki
- 8
- Wyświetlenia
- 2322
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 8) (Komentarze: 12)Remiksy (0)Kolekcje (134)Powiązane
There are four different holders with five different positions on the wall (20 stls in total).
The holder types:
- 12 mm holes for 10 pliers
- 18 mm holes for 8 pliers
- 22 mm holes for 7 pliers
- combo with 5 pcs with 12 mm, two with 18 mm and two with 22 mm
The universal position is centered, but there are four different positions to use the whole length of SKÅDIS wall (76 cm).
Linked to the full post.