LichtBeam - Projection attachment Bowens Mount (Nikon Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Projection attachment for Bowens connection combined with Nikon lens
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed with PETG on my ender 3 with good results. Modified so that I didn't need to use supports on a few of the trays- Print the housing Bowens adapter side down with no supports (some stringing under the plate holder happens that is easy to resolve)
Using with a Nikon 18-55mm kit lens I had laying around (just prop the aperture open) and it works great. Have also used it with my sigma 14mm with good results so you don't necessarily need a nifty 50.
I coupled this with my flash using https://www.thingiverse.com/thing:4537943/files and it works amazing
From the original creator
“For my hobby of flash photography I always wanted to buy a projection attachment, unfortunately these are usually quite expensive. Thanks to my Prusa MK3S+ and Fusion360 I was able to create my own wish. For this I drew 4 inserts that flash 6 different motifs on the wall and a universal slide insert. I use my LichtBeam with a 50 mm 1.8 Nikon lens which I bought on ebay for 60 euros. If there is interest in a Canon lens mount, please message me and I'll adapt the project.”