Raspberry Pi 3B+ and Osoyoo 5" DSI touch screen case for Octodash.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free-standing enclosure for Octodash, using a Rapberry Pi 3B+ and a 5" DSI touch screen by Osoyoo.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 1798
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original design by falken_gt4. Thank you for sharing.
Osoyoo 5" touch screen https://www.amazon.co.uk/dp/B07KJBCNS8?ref=ppx_yo2ov_dt_b_product_details&th=1
I added an insert to the front as well as re-sizing the enclosure to accomodate the Osoyoo screen.
Added a hole for the power lead and some ventilation holes to the back cover.
With a little trimming the screen with attached Pi should fit snug in the enclosure without need for additional securing.
Printed with Prusament Jet Black PLA with a .6 Revo.
I use this enclosure free standing on top of a Lack table connected to a Mk3s.
Remixed Tinkercad design https://www.tinkercad.com/things/bfetikeZ7wZ