HatchBox Spool Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tower to organize your spool storage bins.
- Ocena
- 4,667 / 5
- Polubienia
- 47
- Pobrania
- 253
- Wydruki
- 2
- Wyświetlenia
- 1293
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Have several HatchBox spool parts bins and want to organize them? Turn them into a storage tower!
This model will allow you to stack and connect as many spools as you wish. Start with a base, a washer and a cap. For each spool you want to add print an extension and another washer. Everything screws together and the spools spin easily on the hub.
I printed these with a .4mm nozzle with 2 wall, and 3 top and bottom layer using 12% gyroid infill. Everything prints without supports.
This was designed for HatchBox spools, but may work with others. The inner hub was designed for spools with a 55mm center opening.