2.5" shop vac hose connector/adapter, tapered end - printed replacement for a stock Vacmaster part (v1.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.5" shop vac hose connector/adapter, tapered end - printed replacement for a stock Vacmaster part (v1.0)
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The little C-clip (shown in orange) is a hose retainer thing. When the hose gets inserted, there is a little gap in the hose ridges that the C-clip ends grab onto, and this "hooks" into the hose, until the thumb button is pressed, which releases the grip, allowing the hose to be pulled out.
Assembled for use:

Print orientation:

The C-clip prints without supports, however the main body of the hose connector needs supports enabled to help with printing those openings where the "teeth" ends of the C-clip slip through. I recommend "Tree" style supports. It should be a simple two clicks to enable supports and switch from Normal to Tree. The Tree supports can be seen in light blue in the second image below. They are shaped like a wishbone.




This may work with other brands of hose beside mine. For info sake, here is mine:

Sometimes when you buy more hose from the manufacturer, and cut it into shorter pieces to use around the tools in your shop, you find that need more of these tapered ends / adapters. This is a printed replacement for a stock part.
This can help you connect your 2.5" hose to, for example, this, this, or this:
- Dust Collection Reducer Adapter 4-inch Hose to 2.5-inch Shop Vac hose v1.0
- Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac
- Makita rt0700 dust extractor for 2.5 inch shop vac hose v1.0
This was used in conjunction with my other printed dust collection parts linked below:
- Makita rt0700 dust extractor for 2.5 inch shop vac hose v1.0
- Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac
- Dust Collection Reducer Adapter 4-inch Hose to 2.5-inch Shop Vac hose v1.0
- Dust Collection 4-inch Port to 2.5-inch Hose Tapered Adapter Dust Collection Reducer Fitting (v1.0)
- Dust Collection Adapter for SKIL 10-inch Worm Drive Table Saw, going from 2.5" (ID 64mm) to 2.25" (ID 57mm) v1.0
- Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port
Change log:
- March 25, 2023 8:30 am —uploaded initial v1.0
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.