Raspberry Pi Zero minimal flat case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
19/10/2020 At request of user I have added a version with: Access the HDMI mini port Space inside the case for a…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 187
- Wydruki
- 3
- Wyświetlenia
- 1296
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
19/10/2020
At request of user I have added a version with:
- Access the HDMI mini port
- Space inside the case for a heatsink with a maximum height of 7 mm on the processor.
A minimalistic case for the Raspberry Pi Zero or Zero W without pin header.
Requires no screws, glue or tools to assemble. The Raspberry Pi clicks onto the bottom part via the 4 screw holes and the lid snapfits onto the bottom case.
The case got vents on both sides, this should keep it cool.
Perfect case for Pi-hole.
Print instructions
Designed for 0,15mm layer height with 0,45mm extrusion width.
4 Perimeters for strength.
Prints without supports.
I printed it with Prusament signal white PETG, it should work with PLA but the snap fit feature might not work as well.