Twotrees Sapphire Direct Drive Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple conversion of the twotrees sapphire to direct drive.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This system is designed to work with the afterburner mod for the twotrees sapphire, I never tested it with the original hotend.
A modular system composed of 2 pieces to align the extruder to the hotend trough the original metallic mount. It is compatible with the BMG clone that comes with the printer and with the Bondtech LGX Lite.
Note: for the BMG model, you need to install the NEMA 17 as last step and remove it to detach the extruder mount from the plate. This was necessary due to collision of the assembly with the printer frame. In the case of the LGX, you can totally remove the assembly from the plate.
What you need to print:
- One of the plates
- The actual extruder mount depending on your specific model.
All models have an interface for the cable chain, it is based on this model: https://www.thingiverse.com/thing:2920060
You can also use a zip tie or 10mm nylon cable organizer to keep your wires tight.
MATERIALS:
- 8* M3x8
- 4*M3 heat set inserts
- The mounting hardware for your extruder
If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.
https://ko-fi.com/addictivemanufacturing