Camera holder for c505 hd webcam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix screen overlap by placing your webcam slightly higher.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
Also available for FreeCAD, see attached.
If you have a c505 hd webcam and it is intersecting the screen of your thin-framed monitor, then you can slot the camera into this print and place it on top. That should fix the overlap if you have at least 5mm of frame.
You also need some 2mm foam to pad the inside, otherwise the camera will be loose fitting. I am using Moosgummi which seems to be called EVA-Foam in English. You can see the slightly slanted camera in the cover photo with the two webcams. In this photo the foam isn't inserted yet. The second photo has the foam inside as well as some foam on the back plate to make it grab the monitor tightly.