Creality Ender 3 Auto Level Mount for M8 Pinda Probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting Bracket. Auto Level Probe Mount.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 3317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting Bracket.
Auto Level Probe Mount.
Bobblejot Website
Bobblejot GitHub
Bobblejot Twitter
Bobblejot Patreon
Just a very simple mount with a threaded M8x1 through hole to mount M8 Inductive probes or the Prusa PINDA sensor.
I have printed and tested the thread and all seems Ok just need to print at a lower layer height e.g 160 micron or lower. I haven’t tried mounting it yet as i still have to mount my new magnetic heated beds and flexplates.
Probe offset in X is -44mm, in Y i would try to align it exactly with the nozzle.
Materials:
Pinda v2 Probe - Aliexpress
2 x M3x6mm Cap Head Bolts
2 x M3 Brass Inserts
And That’s it.
Enjoy :-)
Print instructions
Print Settings
Printer: Axis One
Notes:
Printed in Sunlu Filament Black PETG purchased from Amazon.
Print Temp : 230°C
Bed Temp : 75°C
Print Speed : 50mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 25%
Printed on PEI.