Deadpool Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is another version of a Deadpool Coaster.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 228
- Wydruki
- 1
- Wyświetlenia
- 1386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Deadpool Coaster.
These are the settings I recommend.
Layer height 0.2 mm
1 perimeter for "Deadpool Eyes.3mf" and “Deadpool Mask-single_extruder.3mf”
2 perimeters for rest of the parts
Concentric top fill patern for “Deadpool Ring.3mf”
For MMU2S:
Deadpool Coaster MMU2S.3mf
All of my settings are done for Prusa Slicer.
For single extruder:
Deadpool Base-single_extruder.3mf - Pauses for filament change at 1.2mm (Prusa Slicer)
Deadpool Mask-single_extruder.3mf
Deadpool Eyes.3mf
Deadpool Glance.3mf
If you want to use another slicer, play around with slicer settings:
Deadpool Base.3mf
Deadpool Ring.3mf
Deadpool Eyes.3mf
Deadpool Glance.3mf
Deadpool Mask.3mf or Deadpool Mask-single_extruder.3mf
“Deadpool Mask-single_extruder.3mf” has 0.1mm tolerance for eyes and glance.
CoasterHolder-6.3mf is for 6 Caosters
CoasterHolder-8.3mf is for 8 Coasters
These Coaster holders are compatible with my ROG Coasters