Standing Desk Cable Chain Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of jhultgre's design. I added a start and end link.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 426
- Wydruki
- 2
- Wyświetlenia
- 2034
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
The cable end link is designed to be attached to the underside of a desk. I added a cutout for a command strip with the adhesive section cut down to 50mm L. I ended up using a pair of hook and loop command strips for this, but any kind should work. Alternatively, if you're okay with a more permanent solution you could simply glue around the edge and stick it to the desk.
Tips:
The underside of the links will likely have some defects due to the overhang, but if you clean them up a bit it won't hinder the chain's movement. I used a file and some sand paper.
I recommend using a deburring tool and sanding the holes in the links, it will still work without this step but the movement won't be as smooth.
I recommend working the chain in by hand before installing it, this will help to smooth out the movement.
For reference I used standard PLA with 15% infill and had no issues. My best results have been in the prusa slicer using snug rectilinear supports and the automatic support painting tool.