Samsung Jet Accessory Wall Mount (improved)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved mount for Samsung Jet accessories, made the neck a bit longer to prevent from scratching the screws.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 521
- Wydruki
- 2
- Wyświetlenia
- 2291
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Originally uploaded on Thingiverse. The original design has too little space between the screws and the mounted part which makes them scratch along each other.
Improved mount for Samsung Jet accessories, made the neck a bit longer to prevent from scratching the screws. Edited in Blender.
Printing instructions:
Layer height: 0.2 mm
Perimeters: 3 or more
Infill: 15% or more
Supports: depending on orientation
Material: PLA+
Optional settings:
Printing upside down is possible so there is no need for supports, the first layers in the curve are prone to warping, be aware.