Spice Rotator - printed only [Outdated]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spice Rotator based on Coin Rotator (printed only) https://www.printables.com/de/model/422240-coin-rotator-eur-update
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 28.08.2023
Please note i've created an upgraded version of the spice rotator:
https://www.printables.com/de/model/566336-spice-rotator-reworked-v2-printed-only
-----------------------------------------------------------------------------------------
Based on my Coin Rotator
https://www.printables.com/de/model/422240-coin-rotator-eur-update
-----------------------------------------------------------------------------------------
I've made a printed only, stackable Spice Rotator which holds 6 jars per floor with Dmax=43mm and H=85mm.
Duo to modular construction, the Height is adjustable with the part Coin_Rotator_Distancer_20mm. (could add further distancers if needed).
NOTE:
I have NOT tested more than 2 floors - therefor i've also added a larger Base part with D=120mm.
All parts are printed with 0.2mm layer height PLA 200°/60°.
Part Spice_Rotator_Base2 needs normal supports for the inner contour