Toy truck trailer support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My son's cheap toy truck trailer broke a bit so I designed this replacement part for it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
My son's cheap toy truck trailer broke a bit so I designed this replacement part for it.
This has one more screw hole than the original part for a better connection. Original part has a tiny plastic pin instead of the third screw which wouldn't have worked as a printed piece (would have snapped off too easily).
This part probably works ok by using only the 2 original screws and leaving the third screw hole open, but work a bit better if you find an extra screw similar in size to the originals and use that for the third hole.
Print instructions
- Supports: No
- Layer height: 0.2 mm
- Infill: 25%
- Perimeters: 4
- Top solid layers: 6
- Bottom solid layers: 3
- Detect thin walls: on