Sunlu FilaDryer S2 PTFE reduction (with magnetic holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduction to a PTFE tube with an optimal partial opening of the door with a magnetic holder.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 2361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I slightly reduced the opening of the door so that not much heat escapes, but so that it is enough to remove moisture. The PTFE tube is a little visible from above, but that doesn't matter at all, it's around the corner. The reduction is double-sided.
You need 12x magnets with a diameter of 5mm and a height of 3mm.
I glued the magnets with super glue.
Foam double-sided adhesive tape is required to attach the reducer holder.
Trochu som zmenšil pootvorenie dvierok aby neunikalo moc teplo, ale aby to stačilo na odvod vlhkosti.PTFE trubička je sice trochu viditelná z hore ale to vôbec nevadí je to kôli uhlu.Redukcia je obojstranná.
Potrebné je 12x magnet s priemerom 5mm a výškou 3mm.
Magnety som nalepil sekundovým lepidlom.
Na uchytenie držiaku redukcie je potrebná penová obojstranna lepiaca páska.