Fully Printable V2 Balisong Butterfly Knife - improved printability of the specific part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the file of specific part in original models which is repared the problem can occur the bad printability.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 237
- Wydruki
- 2
- Wyświetlenia
- 4334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
The ‘sharplock side handle’ part of that balisong models has the problem which can occur the bad print quality at the bottom of the print result when go printing without any other post-processing. So I applied simple tricky way to make improved model from the original. What I did is just attaching dummy cuboid under beneath the original model.
If you experienced the problem with printing the original handle consider using this. To print this, import this from Cura, uncheck auto dropdown, give z offset at -15mm, and print it you will get profit.