Anycubic i3 Mega /Mega S Heatbed Cable Chain Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
here we have a Bedchain Mod for the Anycubic Mega/Mega S
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 75
- Wydruki
- 2
- Wyświetlenia
- 1526
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
before you start you need the following parts
drag chain 7x7 like this LINK
connecting clamp Wago 221 this one LINK
melting thread m3 like this LINK (I recommend the short version)
cable ties like this LINK
3mm drill
INFO
you have to drill 2 holes in the case
Since my i3 is in an enclosure, I didn't want a cable chain that drives out to the rear
so i searched the net for a version that i could use but couldn't find anything so i designed my own version
I deliberately designed 2 holders for the chain to prevent the chain from lifting when the heating bed moves backwards, otherwise the print head could collide with the cable chain
this version works with the original glass bed as well as with an aluminum bed