Prusa 3MK/S Logitech Camholder X-Axis Cableprotection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new…
- Ocena
- 4,75 / 5
- Polubienia
- 35
- Pobrania
- 166
- Wydruki
- 8
- Wyświetlenia
- 1213
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You like my Work?
Support my efforts and push the like ❤️
Make my day and post yout Makes 🤗
I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new design and solved another problem to secure the cable routing on the x-motor right away.
The bracket is compatible with the Logitech C270 and C310.
For those who don't need the cableprotection or already use another solution there is also a version without.
2x M3x10 screws
1x M3x18 screws
1x Small zip tie
Print instructions
My recommendation:
Print in PETG 0.15mm layer height, 20% infill gyroid, no support.
Standard:
Print in PETG or PLA 0.2mm layer height, 15% infill gyroid, no support.