1 / 4
Satsana 5015 duct for Ender 5 w/ Micro Swiss DD & CR Touch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Satsana 5015 duct for Ender 5 w/ Micro Swiss DD & CR Touch
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
This is yet another remix of the Satsana duct.
This one is designed for an Ender 5 with the Micro Swiss direct drive and a CR Touch ABL sensor. I designed it so the ducts sit 1.5mm from the surface of the print for optimal cooling. The CR Touch mount is at the optimal height, with an x offset of -47 and y offset of -9.5.
Printing recommendations are the same as the original Satsana duct.
