Genmitsu ProVer 4030 Pen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts the 4030 into a drawing machine
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a pen holder that mounts to the side of the ProVerXL 4030 spindle. It allows for great pen art and another use for these machines. The holder fits 'sharpie' markers (or any pen with a 12mm shaft. It can hold the pen straight or at an adjustable angle.
Prints in 3 components
Pen Holder
Pen Bracket
M6 Thumb screw cover
Assembly is simple. Insert the nuts in the channels in the head of the pen holder and ensure they align to the bolt holes on the faces. Glue the thumb screw onto the bolt and screw in, this holds the pen captive.
With the remaining bot, screw a nut onto the thread then add a washer and then the bracket. Tighten up and your ready to mount on the machine with the remaining m5 bolt
BOM
2 M6 Bolts
3 M6 Nuts
1 M5 Bolt (to substitute the original spindle bolt
1 washer