Posable feet for MINI 13 (print-in-place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-Place, updated for MINI 13 foot joint, Fitsr layer 0.2mm other 0.15mm
- Ocena
- 5 / 5
- Polubienia
- 247
- Pobrania
- 999
- Wydruki
- 6
- Wyświetlenia
- 3665
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print-in-Place, updated for MINI 13 foot joint, this also work with LUCKY 13
UPDATED: uploaded V2, it is shorter than V1, same width with MINI 13 original foot
Print with same setting as MINI 13:
These are the settings I use for best results (at 100% scale and with a 0.4mm nozzle)
- Layer height 0.15mm (first layer 0.2mm)
- 3 perimeters
- 30% rectilinear infill
- Slow down the first layer print speed (30% of default)
- 0.25mm elephant foot compensation ****
- Print external perimeters first
- No brim or support material
**** elephant foot setting may vary by printer, please adjust if print failed.
All model is printed and tested by myself, enjoy~
I'm a HONG KONG MAKER, Thanks, Enjoy!
Visit my profile for more models and welcome to follow my social media account as below,
Instagram: https://www.instagram.com/fullydimension/
YouTube: https://www.youtube.com/c/fullydimension (in cantonese only)